俄罗斯是世界上养殖屠宰行业的大国，每年的肉禽类产量多达上千万吨，与此同时带来的是屠宰行业所产生的污水量也非常大，很多屠宰工厂为了节约成本，为了节约成本，一般会到中国进口性价比相对比较高的设备，下面中侨启迪从我们一个出口俄罗斯屠宰污水处理设备项目带您了解一下此设备。
 

       出口俄罗斯屠宰污水处理设备可选择处理工艺很多，但设备核心会采用物化、生化处理工艺，这是净化过程的必需。屠宰厂污水处理时应根据进水水质的特点、处理和排放要求并综合考虑的经济、管理因素选择合适的污水处理设备及工艺，综合考虑废水的一些水质、水量的特征，选用的工艺流程技术的先进、稳妥可靠、经济合理、运转灵活、安全适用，并注意不同屠宰废水处理工艺的组合的使用。

 
       一款性能良好、高效率污水处理设备在处理屠宰污水的过程中表现出良好的市场适应能力，提高效率同时，为人们提供便利，营造绿色环境，促进社会和谐发展。
 
       出口俄罗斯屠宰污水处理设备采用目前国内外都较成熟的生物接触氧化法，集去除COD、BOD、氨氮、SS、有机污染物等污染物为一体，具体处理工艺为：
 
       屠宰污水-格栅-隔油池-调节池-气浮池-水解酸化池-接触氧化池-消毒池-直接排放。具体分为一级处理、二级处理、三级处理：
 
       一级处理为物理处理，指从格栅到气浮池阶段，旨在去除屠宰污水中油脂质、毛、肉屑、骨屑、内脏杂物、未消化的食物、粪便等污染物，污水经格栅过滤，到隔油池，进行油水隔离，后来到调节池，调节水量，后气浮池分离溶解到水中的微小油粒，到此为一级处理；二级处理主要为水解酸化+接触氧化，去除水中COD、氨氮、BOD等污染物；三级处理主要进行消毒，除去污水中的大量的有害病菌。
 

       出口俄罗斯屠宰污水处理设备采用碳钢、玻璃钢、不锈钢等材质，内外四层包裹，防腐防锈，耐受高低温等极温温度的影响，在自然环境极其恶劣的条件下仍能正常运行。设备安装有PLC自动控制系统，根据水量大小自动控制设备的运行和停止，减小能耗，降低成本。设备去除效率高达99%，出水稳定，耐水的冲击负荷。
 
       以上就是中侨启迪小编为您整理的关于出口俄罗斯屠宰污水处理设备相关的资料了，如果您想要购买出口污水处理设备可以联系我们的客服工作人员，期待与您的合作！
 

 
       Russia is a large country in the breeding and slaughtering industry in the world, with an annual output of tens of millions of tons of meat and poultry. At the same time, the amount of sewage produced by the slaughtering industry is also very large. In order to save costs, many slaughtering factories generally import equipment with relatively high sex price ratio from China. The following overseas Chinese enlighten you to learn about this equipment from our slaughtering sewage treatment equipment project exported to Russia.

       There are many treatment processes available for slaughtering sewage treatment equipment exported to Russia, but the core of the equipment will adopt physicochemical and biochemical treatment processes, which is necessary for the purification process. During the sewage treatment of slaughterhouse, the appropriate sewage treatment equipment and process shall be selected according to the characteristics of influent water quality, treatment and discharge requirements, and the economic and management factors shall be comprehensively considered. The characteristics of some water quality and quantity of wastewater shall be comprehensively considered. The selected process flow technology shall be advanced, stable, reliable, economical, reasonable, flexible, safe and applicable, and attention shall be paid to the combination of different slaughterhouse wastewater treatment processes.

       A sewage treatment equipment with good performance and high efficiency shows good market adaptability in the process of treating slaughtering sewage, improves efficiency, provides convenience for people, creates a green environment and promotes the harmonious development of society.

       The slaughterhouse sewage treatment equipment exported to Russia adopts the relatively mature biological contact oxidation method at home and abroad, which integrates the removal of COD, BOD, ammonia nitrogen, SS, organic pollutants and other pollutants. The specific treatment process is as follows:

       Slaughtering sewage - grid - oil separator - regulating tank - air flotation tank - hydrolysis acidification tank - contact oxidation tank - disinfection tank - direct discharge. It is divided into primary treatment, secondary treatment and tertiary treatment:

       The primary treatment is physical treatment, which refers to the stage from the grid to the air flotation tank, which aims to remove the pollutants such as oil lipid, hair, meat scraps, bone scraps, visceral sundries, undigested food, feces and so on in the slaughtering sewage. The sewage is filtered through the grid to the oil separation tank for oil-water isolation, and then to the regulation tank to adjust the water volume. After that, the air flotation tank separates the small oil particles dissolved in the water. This is the primary treatment; The secondary treatment is mainly hydrolysis acidification + contact oxidation to remove COD, ammonia nitrogen, BOD and other pollutants in water; The tertiary treatment is mainly used for disinfection to remove a large number of harmful bacteria in sewage.

       The slaughtering sewage treatment equipment exported to Russia is made of carbon steel, glass fiber reinforced plastics, stainless steel and other materials, wrapped with four layers inside and outside, anti-corrosion and rust prevention, resistant to the influence of extreme temperature such as high and low temperature, and can still operate normally under the extremely harsh conditions of the natural environment. The equipment is equipped with PLC automatic control system to automatically control the operation and stop of the equipment according to the water volume, so as to reduce energy consumption and cost. The removal efficiency of the equipment is up to 99%, the effluent is stable and resistant to the impact load of water.

       The above is the information about the export of slaughtering sewage treatment equipment in Russia compiled by overseas Chinese enlightenment Xiaobian for you. If you want to buy export sewage treatment equipment, you can contact our customer service staff and look forward to cooperating with you!