出口东南亚洗衣污水处理设备

编辑：出口污水处理设备来自：https://www.zqwscl.com /日期：2026-04-20 09:49 / 人气：

东南亚专属定制・高效稳定・高性价比・易运维

一、东南亚市场背景与需求

东南亚（泰国、印尼、马来西亚、越南、菲律宾等）酒店、洗衣厂、纺织印染、医院、邮轮洗衣业高速增长，但环保标准趋严、水资源紧张、电力不稳、运维能力弱。

核心痛点：高 COD、高 SS、高阴离子洗涤剂（LAS）、高色度、pH 波动、水质水量波动大
政策：印尼（PerMenLH 11/2025）、泰国、越南等强制达标，严查在线监测
偏好：一体化 / 集装箱式、快速安装、低能耗、少维护、可回用、性价比高

二、设备核心工艺（东南亚优选方案）

主流工艺：A/O+MBR / 兼氧 MBR / 气浮 + 生化 + 深度过滤

标准流程（稳定达标 + 回用）

预处理：格栅→调节池（均化水质水量、pH 调节）
物化处理：混凝 / 气浮（除 SS、色度、LAS、油脂）
生化处理：水解酸化 + A/O 接触氧化 / MBR（高效降 COD、BOD、氨氮）
深度处理：UF/RO + 消毒（回用至洗衣 / 清洗，回收率 70–85%）
污泥：浓缩脱水→外运

三、设备类型与优势（适配东南亚）

1. 集装箱式 / 撬装一体化（最热销）

预制出厂、即到即用：1 周内投产，省土建 50%+
占地小、可移动、可户外：适合厂房紧张、租赁场地
耐湿热、防腐：304/316 不锈钢、环氧防腐，适配高温高湿
全自动 + 远程监控：少人工、断电保护、故障报警

2. 地埋式（适合社区 / 小型酒店）

埋地安装、地表绿化 / 停车、无噪音异味
保温好、抗暴雨：适合多雨地区

3. 大型模块化（洗衣厂 / 工业园）

组合扩容、10–500 m³/d、稳定达标

四、核心卖点（东南亚定制化）

高去除率、稳定达标
- COD 去除90–95%、BOD95%+、SS95%+、LAS90%+、脱色90%+
- 出水满足：泰国 / 印尼 / 越南 / 马来西亚排放 / 回用标准
节水回用（核心竞争力）
- 中水回用 70–85%：大幅降低水费、排污费
- 适配缺水地区、高水价市场
低能耗、低污泥、易维护
- 高效曝气、变频控制、省电 30%+
- MBR 低污泥、少清掏、省危废费用
- 耐高盐、耐 LAS、抗冲击：适配洗衣污水强波动
湿热防腐、耐电压不稳
- 热带设计、IP55–65、防腐涂层、宽电压适配
交钥匙 + 本地化服务
- 设计→生产→运输→安装调试→培训→备件
- 英文手册、英文 PLC 界面、24h 远程支持

五、适用场景（东南亚全覆盖）

酒店 / 度假村 / 民宿（主流）
工业洗衣厂 / 纺织印染（量大、高污染）
医院 / 疗养院（消毒要求高）
邮轮 / 海上平台（移动、紧凑）
学校 / 公寓 / 军营（集中洗涤）

六、为什么选山东中侨启迪环保装备有限公司

10 年 + 出口经验：东南亚数百套案例（泰国、印尼、越南、马来西亚）
定制化强：按水质、水量、标准、场地、预算精准设计
高性价比：比欧美便宜 40–50%、性能稳定、寿命长
认证齐全：ISO、CE、SASO、第三方检测、清关无忧
全链条服务：外贸单证、物流、清关、安装培训、长期售后

七、典型参数（参考）

处理量：5–500 m³/d
进水（典型）：COD 800–2500、BOD 300–1000、SS 500–1500、LAS 20–80 mg/L
出水（达标）：COD ≤50–100、BOD ≤10–20、SS ≤10–30、LAS ≤1–5 mg/L
材质：碳钢防腐 / 304 不锈钢 / 玻璃钢
控制：PLC 全自动、远程监控、APP
回用：UF+RO + 消毒，回用于洗涤 / 清洗 / 绿化

山东中侨启迪环保装备有限公司

专注：一体化污水处理设备、MBR / 集装箱 / 地埋式、出口定制
优势：东南亚成熟方案、快速交付、售后无忧、高性价比

Customized for Southeast Asia · Efficient & Stable · Cost-Effective · Easy Operation

1. Market Background & Demand in Southeast Asia

Southeast Asia (Thailand, Indonesia, Malaysia, Vietnam, Philippines, etc.) enjoys a booming development in laundry services for hotels, laundromats, textile printing & dyeing, hospitals and cruise liners. However, environmental protection standards are becoming stricter, water resources are in shortage, power supply is unstable, and operation & maintenance capacity is weak.

Core Pain Points

High COD, high SS, high anionic detergent (LAS), high chroma, fluctuating pH, and unstable water quality & quantity.

Policies

Indonesia (PerMenLH 11/2025), Thailand, Vietnam and other countries impose mandatory discharge standards with strict online monitoring.

Market Preferences

Integrated / containerized type, fast installation, low energy consumption, low maintenance, recyclable water, and high cost performance.

2. Core Equipment Technology (Optimal Solution for Southeast Asia)

Main Technologies: A/O + MBR / Facultative MBR / Dissolved Air Flotation + Biochemical Treatment + Advanced Filtration

Standard Process (Stable Compliance + Water Reuse)

Pretreatment: Grille → Adjustment Tank (equalize water quality & quantity, pH adjustment)
Physicochemical Treatment: Coagulation / Air Flotation (remove SS, chroma, LAS and grease)
Biochemical Treatment: Hydrolysis Acidification + A/O Contact Oxidation / MBR (efficiently reduce COD, BOD and ammonia nitrogen)
Advanced Treatment: UF/RO + Disinfection (reused for laundry / cleaning, water recovery rate 70–85%)
Sludge Treatment: Thickening & Dewatering → External Transportation

3. Equipment Types & Advantages (Adapted to Southeast Asia)

① Containerized / Skid-Mounted Integrated Equipment (Best-Selling)

Prefabricated, ready for use upon arrival: put into operation within 1 week, save over 50% of civil engineering cost
Small footprint, movable and outdoor-installable: ideal for plants with limited space or leased sites
Heat & humidity resistant, anti-corrosion: 304/316 stainless steel, epoxy anti-corrosion coating, suitable for high temperature and humidity
Fully automatic + remote monitoring: less labor required, power failure protection, fault alarm

② Underground Type (For Communities / Small Hotels)

Underground installation, ground available for greening / parking, no noise or odor
Good heat preservation, rainstorm resistant: suitable for rainy regions

③ Large Modular Type (For Laundromats / Industrial Parks)

Combined expansion, capacity 10–500 m³/d, stable discharge compliance

4. Core Selling Points (Customized for Southeast Asia)

High Removal Rate & Stable Compliance

COD removal rate: 90–95%, BOD removal rate: above 95%, SS removal rate: above 95%
LAS removal rate: above 90%, decolorization rate: above 90%
Effluent meets discharge / reuse standards of Thailand, Indonesia, Vietnam and Malaysia

Water Saving & Reuse (Core Competitiveness)

Reclaimed water reuse rate: 70–85%, greatly reducing water and sewage fees
Suitable for water-scarce regions and markets with high water prices

Low Energy Consumption, Low Sludge & Easy Maintenance

High-efficiency aeration, variable frequency control, save over 30% electricity
Low sludge yield of MBR, less dredging, lower hazardous waste cost
Resistant to high salinity, LAS and shock loading: adapts to strong fluctuations of laundry wastewater

Heat & Humidity Anti-Corrosion & Wide Voltage Adaptation

Tropical design, IP55–65 protection, anti-corrosion coating, compatible with unstable voltage

Turnkey Solution + Localized Service

One-stop service: design → production → transportation → installation & commissioning → training → spare parts
English manuals, English PLC interface, 24-hour remote support

5. Application Scenarios (Full Coverage in Southeast Asia)

Hotels / Resorts / Homestays (mainstream)
Industrial laundromats / Textile printing & dyeing (large volume, high pollution)
Hospitals / Sanatoriums (high disinfection requirements)
Cruise liners / Offshore platforms (movable, compact)
Schools / Apartments / Military camps (centralized laundry)

6. Why Choose Shandong Zhongqiao Enlightenment Environmental Protection Equipment Co., Ltd.

Over 10 years of export experience: hundreds of projects in Southeast Asia (Thailand, Indonesia, Vietnam, Malaysia)
Strong customization: precise design based on water quality, flow rate, standards, site and budget
High cost performance: 40–50% lower price than European & American products, stable performance, long service life
Complete certifications: ISO, CE, SASO, third-party testing, hassle-free customs clearance
Full-chain service: foreign trade documents, logistics, customs clearance, installation training, long-term after-sales support

7. Typical Parameters (For Reference)

Treatment Capacity: 5–500 m³/d
Typical Influent: COD 800–2500 mg/L, BOD 300–1000 mg/L, SS 500–1500 mg/L, LAS 20–80 mg/L
Effluent (Compliant): COD ≤50–100 mg/L, BOD ≤10–20 mg/L, SS ≤10–30 mg/L, LAS ≤1–5 mg/L
Material: Anti-corrosion carbon steel / 304 stainless steel / FRP
Control: PLC fully automatic, remote monitoring, APP
Reuse: UF + RO + disinfection, reused for laundry, cleaning and greening

Shandong Zhongqiao Enlightenment Environmental Protection Equipment Co., Ltd.

Specialized in: Integrated wastewater treatment equipment, MBR / containerized / underground type, export customization

Advantages: Mature solutions for Southeast Asia, fast delivery, worry-free after-sales, high cost performance

电话：4006932369